Lens Tint Spray - Remover 150ml

Product code: INPELS-00150-REM

In Stock

GBP new

£6.99

£5.83 ex. VAT

Add to Basket

Lens Tint Spray – Remover 150ml

Part Number: INPELS-00150-REM

Lens Tint Remover is specially formulated to safely dissolve and remove applied lens tint spray, restoring light lenses to their original clear finish. It works effectively on polycarbonate and plastic light lenses, helping to reverse custom tinting without scratching or damaging the surface. Always carry out a compatibility test before full application to ensure safe use on your vehicle’s lenses.

Important – Please Read Before Use

• Ensure both the lens and the can are at room temperature (approx. 17°C–21°C).
• Do not apply below 13°C (55°F).
• Wash lenses thoroughly with warm water and mild detergent, removing all wax, silicone, polish, dirt, and dust.
• Rinse with clean water and dry completely before use.
• Designed specifically for lens tint coatings – may not be effective on other paints or lacquers.

Can Preparation

• Remove the cap using a flat tool at the provided slot.
• Pull off the spray nozzle, remove the transport collar, then re-fit the nozzle.
• Shake the can vigorously for at least 30 seconds before spraying.

Compatibility Test

• Polycarbonate lenses can degrade with age and UV exposure – always test first.
• Spray a small area (~golf ball size) on an inconspicuous part of the lens.
• If the test area becomes cloudy or frosted, stop immediately – do not continue.
• If reaction occurs, restore clarity using fine cutting compound and buffing – seek body shop advice if needed.

Application Instructions

• If the compatibility test is successful, proceed with full application.
• Spray a light mist of remover evenly onto the lens surface.
• Wipe gently in a single direction with a clean, soft cloth – do not use abrasives.
• Flip to a fresh part of the cloth frequently to avoid re-contamination.
• Repeat application as needed until the lens is completely clear.
• Use multiple cloths if necessary for heavy coatings.

Also Available

• Lens Tint – Blue
• Lens Tint – Green
• Lens Tint – Red

• Lens Tint – Smoke
• Lens Tint – Yellow

Product Characteristics

• Removes applied lens tint coatings
• Restores lenses to clear original finish*
• Safe on plastic & polycarbonate surfaces
• Includes compatibility test guidance
• Quick spray-on, wipe-off application
• 150ml aerosol can
• Designed for use on lens tint sprays

*Always carry out a compatibility test before full use. Results may vary depending on lens age and condition.