Lens Tint Spray - Blue 150ml

Product code: INPELS-00150-BLUE

In Stock

GBP new

£6.99

£5.83 ex. VAT

Add to Basket

Lens Tint Spray – Blue 150ml

Part Number: INPELS-00150-BLUE

Lens Tint Spray is a quick and effective way to customise front headlamps, rear lights, side repeaters, and fog light lenses. Available in a range of colours, it adds subtle styling while maintaining light output and legality. The tough satin finish is resistant to scratches, petrol, UV rays, and weather conditions.

Important Note

• Do not apply in temperatures below 13°C (55°F).
• If working in colder conditions, warm the lens with a hair dryer or work in a warm, ventilated area.
• On aged, scratched, or oxidised lenses, restore clarity first with fine polishing before application.

Preparation Instructions

• Wash and dry the lens thoroughly.
• Mask off the surrounding area to prevent overspray.
• Clean the lens to remove grease, wax, oil, polish, and moisture.
• Ensure the surface is fully dry before spraying.

Can Preparation

• Remove the cap, pull off the nozzle, discard the transport collar, then re-fit the nozzle.
• Shake the can vigorously for 2–3 minutes before spraying.

Application Instructions

• Test spray on a hidden area to confirm compatibility.
• Spray a short burst to check nozzle function before application.
• Hold 20–30cm from the lens and apply light, even coats in horizontal and vertical motions.
• If further coats are required, wait ~5 minutes until the surface is tacky before re-applying.
• Avoid heavy coats – light tinting is recommended to preserve brightness.

Also Available

• Lens Tint – Green
• Lens Tint – Red
• Lens Tint – Smoke

• Lens Tint – Yellow
• Lens Tint – Remover

Product Characteristics

• Colour: Blue
• Volume: 150ml aerosol
• Satin finish – scratch & shock resistant
• Weather, petrol & UV resistant
• Quick-dry, easy application
• Suitable for headlights, tail lights, side repeaters, fogs
• Minimal distortion of light output