Textured Black Protective Film
Part Number: INPEDF01BK
Durable self-adhesive film designed for styling and protecting both interior and exterior vehicle surfaces. The textured black finish provides a sleek, discreet look while helping to guard against everyday chips, scratches, and scuffs. Suitable for flat and gently curved surfaces, it offers a professional upgrade for vehicles of all types.
Important Installation Notes
- Do not fit in temperatures below 13°C (55°F).
- Warm the surface or work in a heated area if needed.
- Once applied, do not attempt to reposition the film.
- Allow adhesive to cure – avoid washing the vehicle for 3 days after installation.
Surface Preparation
- Clean thoroughly to remove all dirt, wax, grease, polish, oil, and moisture.
- Use a degreaser or cleaner safe for paintwork (white spirit or methylated spirits are suitable).
- If applying to interior panels, remove all traces of polish or silicone.
- Ensure the surface is fully dry before application.
- Do not stretch the film during fitting.
Fitting Instructions
For best results, create a paper or card template before cutting the film.
- Method A – Dry Fit: Cut to shape, peel back 1–2cm of the backing, fix down the exposed end, and smooth into place while removing air bubbles. Pop stubborn bubbles with a pin.
- Method B – Wet Fit: Spray a weak soapy solution onto both the film and surface. Position the film, adjust alignment, then use a squeegee to push out excess solution. Leave to dry fully once fitted.
Also Available