Engine Enamel Paint – Black 250ml
Part Number: INPEE01-BK
High-quality, long-lasting gloss enamel formulated with ceramic resin to withstand continuous temperatures up to 250°C. Ideal for engine blocks, rocker covers, gear casings, brackets, and other metal components. Provides a tough, chip-resistant finish that resists oil, fuel additives, road salt, and weathering.
Preparation
- Ensure parts and paint are at room temperature (17–21°C).
- Work in a warm, dry, dust-free area.
- Remove rust, dirt, and loose debris with a wire/steel brush.
- Degrease thoroughly to remove oil, grease, silicone, and contaminants.
- Mask areas not to be painted; ensure surfaces are fully clean and dry.
- For aluminium, smooth, or rusty surfaces, apply a suitable etch primer for best adhesion.
Application
- Stir thoroughly for at least 2 minutes before use.
- Brush on thin, even coats, avoiding runs and drips.
- Allow ~30 minutes between coats.
- Apply 2–3 coats or until full coverage is achieved.
- Allow a minimum of 2 hours before starting the engine.
- Operate only once the enamel is fully dry and cured.
Also Available