Sill Guard Black (2.36mtr x 90mm)

Product code: INP607630

Low Stock

GBP new

£9.99

£8.33 ex. VAT

Add to Basket

Sill Guard – Black (2.36m x 90mm)

Part Number: INP607630

Ultra-thin, tough, self-adhesive protective film designed to shield door sills and other vulnerable bodywork from knocks, chips, and scratches. Easy to cut and shape, it can also be used to disguise minor existing paintwork blemishes for a clean, factory-fresh look. Supplied on a 2.36 metre roll to cover the sills of most 4-door vehicles.

Key Features

• Protects lower body panels from scratches, chips, and scuffs
• Covers minor existing damage on sills and painted surfaces
• 2.36 m roll – suitable for most 4-door vehicles
• Easy to cut, trim, and shape for custom applications
• Self-adhesive for quick, simple fitting
• Versatile use on multiple interior/exterior areas

Preparation & Application

• Thoroughly clean the area with a suitable degreaser/cleaner to remove oil, wax, dirt, and moisture; dry completely.
• Do not fit below 13 °C (55 °F). If cold, gently warm the surface and the film (e.g., with a hair dryer) or install indoors.
• Avoid stretching during fitting to prevent later shrinkage.
• Measure the area and trim the film to length/shape; for complex shapes, make a paper/card template first.
• Trim the leading edge of the backing paper flush with the film to aid removal while keeping adhesive clean.
• Peel back 2–5 cm (1–2") of backing to create a flap, align the starting edge, and stick down.
• Slowly pull away the backing a few centimetres at a time, smoothing firmly to eliminate air bubbles.
• Apply with care and follow preparation steps for long-lasting protection.

Product Characteristics

• Finish/Colour: Black
• Roll size: 2.36 m × 90 mm
• Material: Self-adhesive protective film
• Profile: Ultra-thin, flexible
• Fitment: Cut-to-fit (straight or gently curved areas)
• Use: Door sills and other vulnerable painted surfaces
• Minimum install temp: 13 °C (55 °F)
• Application: Dry install; do not stretch